Adjusting the AIRHAWK Seating System
For the AIRHAWK Seating System to be effective, it must be properly adjusted. The goal is to allow yourself to sink as deeply as possible into the product without hitting the bottom. This is achieved by having as little air in the cushion as possible. Proper adjustment can only be done while you are sitting on the product.
Step 1: Push the green knob to the in position.
Step 2: Open the fill valve by unscrewing it counter-clockwise.
Step 3: Add air using the pump until all of the cells are visibly filled. Close the fill valve by screwing it clockwise.
Step 4: Place the AIRHAWK Seating System on your seat with the ISOFLO
Control to the right side (right side when seated).
Step 5: Sit on the System in your normal seated position and remain as still as possible.
IMPORTANT! Adjust the air by opening the fill valve and releasing air until you sink down into the cushion. Close fill valve. Ideal inflation is about 1/2 inch off the seat. If you bottom out on the base of the seat, add more air through the fill valve and adjust again.
DO NOT OVERINFLATE. This product works most effectively with a minimal amount of air.
Step 6: If you feel too much pressure under your legs, force air out of
the front of the System.
Step 7: Push the red knob to the in position.
Attaching Your Seating System to the existing truck seat
Your AIRHAWK Seating System includes a cover that can be placed directly on your existing truck seat.
Place the AIRHAWK on the seat with the smooth fabric side up.